PENGENALAN

AR – B.90 merupakan produk dengan formula yang dirancang khusus untuk memelihara air ketel bertekanan rendah (17,5 Kg/cm2 – 250 psi).

KEGUNAAN

• Mencegah terjadinya korosi dan karat serta kerak air pada ketel
• Menghilangkan keasaman air
• Dapat menahan lumpur air sehingga mudah dicerat waktu pembuangan air
• Bereaksi kimiawi dengan kesadahan air dalam ketel dengan membentuk lumpur air

KEUNTUNGAN

• Bersifat multi fungsi untuk memelihara air ketel, mudah pemakaian dan pengontrolannya dengan Test Kit yang sederhana
• Dapat mempertahankan kapasitas produksi steam
•  Dapat memperpanjang umur tekhnis ketel, terutama pipa-pipanya

PEMAKAIAN

• Pada Boiler yang bertekanan rendah
• Pada economizer sampai tekanan 200 psi

CARA PEMAKAIAN

Tuangkan AR – B.90 kedalam tangki pengisian atau pada isapan pompa pengisian air ketel. Dosis pemakaian adalah 6 liter untuk setiap ton air dalam ketel. Cara pengaturan dosis dapat dilakukan dengan Test Kit AR – TB.90.

PENGONTROLAN DOSIS

Pengontrolan dosis ARI – B.90 dilakukan dengan test alkalinitas “P” dari air ketel kira-kira 100 sampai 300 ppm.

 Jika pembacaan hasil test alkalinitas “P” kurang dari 100ppm perlu diberikan tambahan AR – B.90 untuk setiap ton air ketel akan menaikkan pembacaan testing alkalinitas “P” sebesar + 170ppm.

Setelah penambahan  AR – B.90 tunggu 1 jam sebelum diadakan test ulang.

Bila test alkalinitas “P” melebihi standar 100 – 300ppm, karena dosis terlalu tinggi atau alkalinitas air pengisian memang tinggi, maka ketel perlu dicerat sampai nilai 100 – 300ppm “P” alkalinitas tercapai lagi. Baru kemudian ditambah dengan air yang lebih baik.

ENGLISH VERSION

INTRODUCTION

AR – B.90 it is a design formula to treat Boiler to have lower pressure (17.5 kg/cm2 – 250 psi)

FUNCTION

• To protect corrosion and rust and slag water onto boiler

• To eliminate water acid

• To resistance with clay and easy to process when deposal

• Chemical reaction to water into Boiler to contruct clay water

ADVANTAGE

• Multi function characteristic to treat Boiler water, easy to use and control and simple Test Kit

• To maintaint steam production capacity

• To expand Boiler economic period specific pipes

PROCEDURE

• Low pressure Boiler

• It is economizer with 200 psi

DIRECTION FOR USE

• Please pour AR – B.90 to tank or suction pump of Boiler.

• Your dosage 6 Liter per ton water Boiler. To control your dosage, use Test Kit AR – TB.90

HOW TO CONTROL YOUR DOSAGE

To control your dosage with alkaline test “P” from Boiler approximately 100 to 300 ppm. If your test shown less 10ppm, you shall be added our AR – B.90. Additional 6 Liter per ton water Boiler, shown alkaline test is approximately 170 ppm.

After finished, please you wait for one hour before re-test.

If your test allow more 100-300 ppm, as your high dosage as well as water alkaline to fill that also is high,  your boiler pressured to 100-300 ppm allow, then added water is better

Salinity Control or Boiler Water Chloride Grade  / Draw Off Boiler Water

Salty control or chloride grade to boiler to test with Test Kit of Chloride from AR – B 90.
The result of chloride test will directly be blowdown to water or not boiler. Chloride is not change if chemical reaction into boiler to mineral grade into boiler.
The result of chloride test shown at 200 ppm as normal chloride or salty.
If chloride test shown more 200 ppm that blow down and it should be filled with clean water.

CAUTION

Keep a dry, and keep away friom flammable point, if pour, wash with water immediately, keep away directly contact from your skin and eyes, if any wash with clean water immediately